Nashville, TN, January 20, 2015 – TRAC Outdoor Products introduces the TRAC® AutoDeploy Anchor Winch Series, Anger 25™ AutoDeploy and Deckboat 35™ AutoDeploy.
TRAC Outdoor Products’ newest Anchor Winch introductions have Touch and Release AutoDeploy. With the touch of a button (press and release), TRAC AutoDeploy automatically powers down the anchor smoothly and quietly, while you go about your boating activity. When the anchor reaches bottom, the winch stops then will transition from steady power-deploy and begin releasing rope just a few feet at a time, until there is enough rope out. The winch will then “lock”, holding the boat’s position. The amount of rope deployed can be adjusted by pushing UP or DOWN at any time. Or, press the AutoDeploy button again if the anchor drags due to changing conditions, such as wind or current. In addition, when the anchor winch stops letting rope out, the winch can be “locked” manually by pressing any switch button. Best of all, the user doesn’t have to hold the DOWN button until the anchor touches the bottom. This feature is great for fishing to allow a “controlled” drift; and great on pontoon and deck boats where there are distractions.
The AutoDeploy Anchor Winches come with a sealed membrane switch on the winch housing and a wireless remote control. The remote includes a bracket to hold the remote secure at the helm or wherever the user chooses. For the Angler 25, the anchor davit can be installed away from the winch or attached tight to it. For the Deckboat 35, the davit is integrated with the winch frame for the easiest installation of all our winches and requires just 10”x10” of deck space – least in industry.
Like all the TRAC Anchor Winches, the AutoDeploy Series comes standard with rugged all-steel gears, 100’ of 0.20” pre-wound double-braided anchor rope (700 lb. tensile strength), auto-resetting circuit breaker, 17’ of 14-gauge marine-grade battery wire, an anchor safety cable and all assembly hardware. It runs quietly and smoothly on 12v power with low amp draw.
Angler 25 AutoDeploy Specifications:
Manufacturer’s Suggested Retail Price: $215.95
Deckboat 35 AutoDeploy Specifications:
Manufacturer’s Suggested Retail Price: $235.95
About TRAC Outdoor Products Company
TRAC Outdoor Products Company is a US-based product design and development company. The company has been supplying packaged consumer goods to the Marine, Fishing and Sporting Goods markets as well as OEM components to boat and trailer manufacturers for over seventeen years. TRAC focuses on 12 volt powered products with an emphasis on the boating/outdoor enthusiast.
TRAC Outdoor Products Company is motivated to make leisure activities less work and more enjoyable for our consumers. We design products to exceed customer expectations in the opening to mid-range retail price-points. Our leading product lines under the TRAC® brand name are electric winches for both trailerable boats and anchors. The company also brings to market many more items, ranging from Bilge Pumps to Utility Carts – all to support the marine and outdoor lifestyle. For more information, please visit www.trac-outdoor.com.
Huntsville, Alabama – CDI Electronics, the leading manufacturer of aftermarket ignition components and diagnostic software and Balmar, the leading manufacturer of DC charging systems have chosen Atlantic Marketing Company to represent the companies’ products in the Northeast and Mid-Atlantic Regions.
Atlantic Marketing President Brandon Flack remarked, “CDI Electronics and Balmar are widely recognized as premium suppliers in their respective categories. We are pleased to offer our dealers and distribution partners the opportunity to expand their business with CDI and Balmar’s technically superior products and industry renowned application support.”
CDI Electronics Sales Manager Thomas James added, “With the recent combination of CDI and Balmar, we were looking to augment our selling efforts in the Northeast and Mid-Atlantic Regions with a firm who had deep relationships in both the powerboating and sailing communities. Atlantic Marketing meets our requirement and we are looking forward to expanding our business in all product lines.”
CDI Electronics (www.cdielectronics) has been serving the marine industry with quality ignition components, diagnostic software and technical support for 32 years. Balmar (www.balmar.net) has been serving the industry for 33 years with innovative DC charging solutions for sail and powerboat applications. For more information about the CDI Electronics and Balmar products visit our websites or call +1-800-467-3371.
Headquartered in Stonington, Connecticut, Atlantic Marketing Company (www.amconet.com) is one of the oldest and largest marine manufacturer representative firms on the US East Coast. Distributors and dealers in the Northeast and Mid-Atlantic Regions interested in CDI Electronics and Balmar products can contact AMC at +1-860-535-8292.
STONINGTON, CONNECTICUT (USA) – Atlantic Marketing Company, one of the oldest and largest marine manufacturer representative firms on the US east coast, has appointed Robert Guerrieri as a manufacturers representative for New York and New Jersey.
A New Jersey native who grew up boating and fishing on the Manasquan inlet and Barnegat Bay. Robert’s commitment and passion for boating is a great addition to the Atlantic Marketing team. “I look forward to joining the team at Atlantic Marketing to help grow and maintain our position as one of the strongest marine representative groups in the industry.”
Guerrieri previously held the position of marine store and parts manager at Hoffmans Marina. Robert Guerrieri is an accomplished retail parts and accessories salesman, with over fifteen years of experience in the marine industry. Guerrieri was previously certified in both Mercury and Yamaha engine repair and maintains a diverse knowledge of marine systems.
For more information about Atlantic Marketing Company, visit www.amconet.com or call 1+860.535.8292.
Cobra Electronics Corp. is partnering with Atlantic Marketing, an East Coast independent manufacturer’s representative for marine, trailer, powersports and sporting goods markets.
Atlantic Marketing will manage marine and OEM customers for Cobra’s line of marine electronics.
“Cobra Electronics is widely recognized as one of the most innovative U.S. marine product suppliers, having greatly expanded its marine product line throughout the past several years,” Atlantic Marketing president Brandon Flack said in a statement. “We are pleased to be able to offer our dealer network the opportunity to add valued Cobra Electronics products to their assortments in time for the 2015 boating season.”
Based in Stonington, Conn, Atlantic Marketing has been operating since 1965 and has six offices from Maine to Virginia.
“The team at Atlantic Marketing has developed an excellent reputation with its customers and vendors as a highly knowledgeable and credible representative with an impressive collection of accolades and numerous sales achievements,” said Ricky Johnson, national sales manager for marine electronics at Cobra.
“We are pleased to join forces with them as we accelerate our efforts to bring our innovative and affordable marine products to the forefront of the boating community and we are confident they will deliver outstanding results.”
You must be logged in to post a comment.